Manufacturing Solutions Group

Process Improvement Consulting That Follows the Order, Not the Org Chart

Process improvement consulting from Manufacturing Solutions Group starts by following one real order through your company, from the first call to the day the money lands. That is a different kind of business process improvement than a methodology deck. We work with owner-run companies of roughly 10 to 200 people, manufacturers and field-service companies mostly, where the owner is still the dispatcher, the quoter and the collections department, and the work falls through between seats.

The engagement is scoped one process at a time. The baseline is counted before anything is promised. You keep a process your people run, written on one page, owned by a name, read with one number every week. No retainer is required to make it hold.

Follow one order through the building: process improvement consulting in practice

Pick a real order from last month, one that went sideways. In a 40-person company it passes through about seven hands, and almost nobody has watched it go the whole way. We do, with a notepad. Here is what we count at each step.

One order, start to finish

  • 1. The call: how many places the details land. Three places means two chances to lose something.
  • 2. The quote: hours from call to quote sent, and how often the quote comes back because a measurement or part number was missing.
  • 3. The schedule: how many times the job moves on the board before the crew shows up, and who moved it.
  • 4. The work: what the crew had to call the office about. A part, a gate code, a change the customer asked for at the door.
  • 5. The paperwork: days from job done to hours, materials, photos and signature back in the office, and how much of it arrives on paper.
  • 6. The invoice: days from job done to invoice sent, and how many invoices need a correction after they go out.
  • 7. The payment: days from invoice to cash, and how many times somebody had to ask.

Where work falls through: the five handoffs in a 10 to 200 person company

Nobody in a small company owns the gap between two seats. The intake person did their job, the estimator did theirs, and the order still sat four days. Every company we have walked loses orders at the same five seams, and the handoff, not the department, is the unit we fix.

The five seams

  • Intake to quote: the details were taken, but not the ones the estimator needs, so the quote waits on a callback.
  • Quote to schedule: the customer said yes by text, the yes never reached the board, and the crew found out from the customer.
  • Schedule to execution: the board said Tuesday, the parts said Thursday, and the crew learned which was true at the counter.
  • Execution to invoice: the job finished on the 3rd, the paperwork left the truck on the 11th, and the invoice went out on the 14th.
  • Invoice to collection: the bill carried the wrong PO number and sat in the customer's payables queue until someone called.

The workarounds that became the process

Every company over about fifteen people runs a second process beside the official one. The spreadsheet next to the ERP that holds the real schedule. The owner's text thread that is actually the dispatch board. The step everyone calls "ask Linda" because Linda alone knows which customers need a lien release with the invoice.

We find these by asking one question at each seat: what do you do when the system is wrong? People answer honestly; the workaround is the part they are proud of. We write each one down before touching anything, and we do not delete one on day one. Each encodes a rule nobody wrote down, usually one that protects a customer or a check. The work is to move the rule into the process where everyone can see it, then retire the workaround. Delete first and it comes back under a new name within a month.

Field service: when the process runs out of a truck

In a service company the process lives in a truck, a phone and whatever paperwork made it back by Friday. Dispatch is a text thread, the tech's notes are in his head, parts get billed from memory, and the callback nobody logged shows up as a second job nobody charges for.

The first number we fix in a field-service company is almost always the gap between job done and invoice sent. Every day in that gap is money already earned that cannot be deposited. Closing it takes deciding what the tech must capture before leaving the driveway, who turns that into a bill, and by when. The second number is callbacks, which are process failures wearing a customer-service costume. Tag the reasons and the top two usually point at one handoff.

Not a belt, not a bot: process improvement consulting versus lean consulting versus automation

A Lean Six Sigma program trains a person. Your operations manager comes back with a belt and a toolkit, which is worth having if they have the time and the standing to use it. But the certificate sits with the person, and nothing about the order that sat four days has changed. Lean consulting at its best teaches a team to see waste; it rarely picks up one order and walks it.

Automation speeds a step. If the step is right, it is one of the highest-return dollars you can spend. If the step is wrong, you have made the wrong thing faster and harder to change. Automating a handoff nobody owns produces a very fast version of nobody owning it.

A process improvement engagement fixes the process and leaves it with you. It is the right buy when the problem lives between seats, when the owner cannot name who owns a handoff, or when the last fix was a hire made to absorb a broken step. It is the wrong buy when one person already owns the process and only needs a tool.

One process at a time: how scope is set

We scope by process, not by department and not by month. One process means one order type from intake to cash, or one handoff pair where the loss is obvious. Scope moves with three things: how many handoffs sit inside the process, whether the counts already exist or must be collected by hand for two weeks first, and how much of the work is on site. One handoff in a company whose software already holds the dates is the small end; a whole order flow across two locations is the large end. The proposal names the process, the handoffs in scope, the two numbers below, and the date the work ends.

What counts as done: the two numbers we agree on before we start

Before any work begins, the owner and MSG agree on two numbers in writing. One is a time number, such as days from job done to invoice sent or hours from call to quote. The other is an error or rework number, such as callbacks per month or invoice corrections. We count both for two weeks before changing anything.

The rule does not bend: no baseline, no promise. A consultant who promises a percentage before counting is quoting someone else's company. Both numbers, their baselines and the exit criterion go in the proposal, so done is a fact you can read.

The three decisions only the owner makes

The owner's job in this work is decisions, not hours. We ask for about one hour a week and three decisions. First, which process goes first; we recommend, the owner picks. Second, who owns the process after we leave: not a title, a name, someone who reads the number every week and has the standing to change the sheet. Third, what gets retired, because every fixed process kills a workaround someone is attached to. Owners who delegate these three get a tidy binder and the same handoffs six months later.

What you keep: one page per process, a named owner, a count that gets read

Enterprise firms hand over operating models. A 40-person company needs four things, left in your accounts and your binder.

The artifact set

  • One page per process: the steps, the handoffs, who owns each, and what must be captured before the work moves. A process nobody can read in two minutes is a process nobody follows.
  • A named process owner: the person who reads the number, holds the sheet, and can change it without asking us.
  • One count read weekly: the time number or the error number from the proposal, read by the owner every Monday.
  • Trained people: the folks at each seat know the new handoff rule and why it exists, because they helped write it.

Continuous improvement consulting without the banner

Most gains from process work fade when the consultant leaves, and the usual answer is a continuous improvement program with a board and a monthly meeting. Small companies do not sustain those. What they sustain is a fifteen-minute habit: every week the process owner reads the count and asks one question at the seam where the work slipped.

At 30, 60 and 90 days after handoff we check the two numbers with you by email, at no charge, and tell you in writing whether the process is holding. If the number drifts and the owner cannot see why, call us back. If it is holding and you want the next process, that is a new scope, not a retainer. Continuous improvement consulting done this way is a cadence your company owns, not a program you pay to keep alive.

What this is not: a reorg, a layoff plan, a software sale or a certificate

It is not a reorg; the handoffs between the boxes are the problem, not the boxes. It is not a layoff plan; the fix usually removes work from people who were drowning in it. It is not a software sale; we work inside what you own first and say in writing if a tool is actually missing. It is not a certificate; nobody gets a belt, your process gets a page and an owner.

One honest line: if you are under ten people and the owner can see every job from their desk, you do not need us yet. Write the one page yourself and call us when you cannot see the orders anymore.

The person who walks your order is Karl Gillihan: millwright and projects lead on turbine decks and refinery floors, then founder of a precision manufacturing group where he lived every handoff on this page. He runs Manufacturing Solutions Group from Texas today, with Roger Pemberton, our Operations Director, owning delivery.

Karl Gillihan

Karl Gillihan

President

Founder and President of MSG. He came up as a rotating equipment specialist in the energy industry and now runs MFGBase, LocalAISource, and ServiceStorm.

About Karl Gillihan

Frequently asked

What does process improvement consulting actually do for a company my size?

It follows one real order from the first call to the deposit, finds the handoffs where it stalls, fixes those with the people who do the work, and leaves you a one-page process with a named owner and one number read weekly. That usually means faster quotes, invoices out the day the job ends, and fewer callbacks, measured against a baseline we count first.

How much does process improvement consulting cost?

It is scoped per process with a fixed fee stated in the proposal. The fee moves with the number of handoffs in the process, whether your counts already exist or must be collected first, and how much of the work is on site. You get the number in writing after the first conversation.

How long does a process improvement engagement take?

One process typically runs six to ten weeks: two weeks counting the baseline, three to five weeks fixing the handoffs with your people, and two weeks running it with the new owner before we step back.

Is a 15-person company too small for this?

No. Fifteen people is usually where the owner stops being able to see every job and the first handoffs fail. Under ten people, with every order visible from the owner's desk, you probably do not need us yet.

What is the difference between this and lean consulting or a Six Sigma program?

Lean consulting and Six Sigma programs train your people in a method and leave them a toolkit, which is valuable when someone has the time and standing to use it. We certify nobody. We pick one real order, walk it, fix the handoffs, and leave the process written, owned and measured. If you want both, the engagement comes first.

Should we fix the process before we automate it, or can you do both?

Fix first, then automate the steps that are still manual and repetitive. We offer both and will say plainly when automation is the right first move because the process is already sound.

What do we get at the end, and what happens when you leave?

One page per process, a named owner who can change it without us, one count the owner reads weekly, and people at each seat who know the new rule because they helped write it, all in your systems and your binder. After handoff we check the two numbers with you at 30, 60 and 90 days by email at no charge.

How do you measure whether the improvement worked?

Two numbers agreed before we start, one for time and one for error or rework, each counted for two weeks before anything changes. Done means both moved from their baselines to the exit criteria written in the proposal. No baseline, no promise.

Do you work with service companies, or only manufacturers, and only in Texas?

Both, and no. Field-service companies are about half of this work, and our clients are spread across the United States, not just Texas. The five handoffs are the same in every state; they run through a truck and a phone instead of a building. Baseline counting and the 30, 60 and 90 day checks are remote. On-site weeks are scoped per engagement wherever the company is.

Will this mean layoffs or a reorg?

Almost never. We fix handoffs, not org charts. The usual result is that work comes off people who were drowning in it and the hire you were about to make to absorb a broken step is no longer needed.

How do I choose between process improvement consulting firms?

Ask each one to name the last order they personally walked end to end and what number moved. Ask what the client kept after they left and who owns it now. A firm that answers with a framework name and a percentage has not been in your building yet.

What is continuous improvement consulting, and do we need a formal program?

Continuous improvement consulting is the help you buy to keep gains from fading after the first fix. Formal programs with boards and monthly meetings suit large plants with staff to run them. A 40-person company keeps gains with a weekly fifteen-minute read of one number by the process owner, plus our 30, 60 and 90 day checks.

Pick the order that went wrong last month

Send us the paperwork and we will tell you, in writing, which handoff lost it and whether it is a job for us or a fix you can make yourself.

How do you want to reach us?